How-to-fix-and-solve-Error-79-code-problem-544x270

How to Fix the Error 79 on HP LaserJet Printer 3050?

The HP LaserJet Printer 3050 Error 79 is a vital hardware error. There may be many reasons causing this error such as issues with the network cable, printer driver, motherboard, network or EIO card, firmware DIMMs, etc. This error can be resolved by either using the Repair tool or manually. If you are facing the same issue, then no need to worry about it. You can resolve this issue by following certain steps recommended by HP LaserJet Printer Technical Support.

Methods to Fix Error Code 79 on HP LaserJet Printer 3050:

Method 1: Unplug the power cable

You need to make sure that HP LaserJet Printer 3050 is installed properly. Sometimes disconnecting the power source may solve this error. You have to unplug the power cable to apply this method. Follow the steps mentioned below to proceed:

  1. Disconnect the HP LaserJet Printer 3050 Power cable
  2. Wait for at least 2 to 3 minutes
  3. Connect your power cable again
  4. Check if the error is resolved. In case if the error still persists, you can try using the next method.

Method 2: Perform other tasks

        Step 1: Network replacement

Replace your network cable and the cycle power

Step 2: Removal of Network

Try removing the network and the cycle power

Step 3: Remove the DIMMs of the Printer

Try removing DIMMs for once and the cycle power

Step 4: Test the motherboard of the printer

To test the motherboard, you will have to print by using parallel interface through parallel cable.

Step 5: Cold reset

When the network is removed, perform a Cold Reset in the printer

Step 6: Now replace the Network or EIO Card

When the network cable is removed and the problem still persists, try replacing the Network or EIO           Card

       Step 7: Replace the DIMMs Firmware of the printer

Next, you will have to perform the action of replacing the DIMMs Firmware

      Step 8: Try replacing Formatter Board

If the error still exists, users can replace the Formatter Board of the Printer

Method 3: To fix Error 79 Error, Update the Drivers of HP LaserJet Printer 3050

Often the old drivers in HP LaserJet Printers may cause the difficulties. Therefore it is important to update the printer drivers on time.

The above-mentioned methods will surely help in troubleshooting this error. If you still find this error in your HP LaserJet Printer 3050, then you will be required professional help.

  • error 79 hp printer 1536dnf
  • hp error 79 turn off then on
  • hp error 79 fix
  • 79 service error hp laserjet pro 200
  • 79 service error hp laserjet pro 400 mfp m425dn
  • hp 2840 error 79
  • hp laserjet 5si 79 service error
  • hp laserjet m1522nf error 79

Get in touch with us via HP LaserJet Printer Technical Support Number +1-844-577-2999 for the right assistance

Users can reach us for the quick support to Fix Error Code 79 this issue or any other issue related to HP LaserJet Printer through HP Printer Technical Support Number 1-844-577-2999. We are available round the clock to resolve your issues with the help of certified and experienced technicians available in the technical team as our primary aim is to provide optimum satisfaction to the users.

HP Printer Error Codes 79 Watch Youtube :